Sale of valves for use in the oil and gas sector

Axial Flow LincolnLog design utilizes a tortuous path to distribute pressure drop along the axis of the plug.
The axial stages throttle in unison as the plug strokes, maintaining staging ratios at all lift points.
Velocity and pressure drop are controlled, thus eliminating cavitation and the resulting trim damage.
This valve is highly effective in pump recirculation and high pressure liquid letdown applications, including those found in Hydrotreater processes.

Sizes: 1” through 12” (25 through 300 mm)

Ratings and Connections:
• Flanged: ANSI 600 – 2500
UNI-DIN 100 – 400
• Welded: BW or SW

Body Materials:
• Carbon steel
• Stainless steel
• Chrome-moly

Actuators:
• Model 87/88 multi-spring diaphragm
• Model 51/52/53 piston cylinder

Trims:
• Axial flow technology
• Multi-stage, cage-guided,
anti-cavitation trim
• Class VI available on request

Inherent Characteristic:
• Linear

The 77000 Series multi-stage expanding area control valve is designed primarily for high pressure compressible fluid or two-phase applications. It effectively controls erosion, vibration and high noise conditions, making it an ideal solution for high pressure, high temperature, flashing hydrocarbon liquid services. Typical applications for this design include a range from Hot High Pressure Separator control in Hydroprocessing applications to gas wellhead control in off-shore choke valves as well as a reliable solution for high pressure gas letdown with entrained debris.

Size

2” x 3” through 8” x 10” (50 x 80 through 200 x 250 mm)

Ratings & Connections

flanged: inlet ANSI 900-2500, outlet ANSI 900 – 2500, UNI-DIN 150 – 400; welded: BW or SW

Body Materials

carbon steel; stainless steel; chrome-moly

Actuators

model 37/38 spring-opposed diaphragm; cylinder

Trim

axial flow technology; multi-stage trim (expanding area type); anti-cavitation, flashing, de-gassing, and low noise

Inherent Characteristics

linear

The MiniTork® II is a heavy duty automatic throttling control butterfly valve that provides superior performance by incorporating the following features:
•    Low Dynamic Torque – the unique cupped shape disc results in a dynamic torque considerably lower than conventional butterfly valves.
•    Bi-Directional Flow – The reverse cupped construction of the Minitork disc is not self-limiting.  Accordingly, the low torque can be maintained regardless of flow direction.
•    Deflection-free and backlash-free operation.  Splined and clamped construction with an ouboard ball bearing and a rigid bracket assembly provide the structural rigidity required for precise positioning.
•    Direct Mounted Positioners – Position feedback is directly connected to the valve shaft eliminating potential lost motion and providing improved positioning accuracy. 
•    Triple Bearing System – provides exceptional support and guiding for the shaft.
•    Valve Position Indicator – highly visible, which allows quick visual inspection of disc position.
•    Integrally Cast Extension Bonnet – provides ability to handle wide range of process temperatures.
•    Spring Diaphragm Actuator – with total enclosure of all moving parts provides increased resistance to environmental corrosion.

The 37002 Series is a control valve used on large flow rates with low-pressure drop. It is available with complete PTFE lining (38002
Series) for corrosive fluids applications.

Sizes: 2” through 24”
(50 through 600 mm)

Ratings and Connections:
• Wafer for mounting between flanges:
– ANSI 150 – 300
– UNI-DIN 10 – 40

Body Materials:
• Carbon steel
• Stainless steel
• Liners in Buna-N, Viton and Nordel

Actuators:
• Model 33 spring diaphragm
• Model 35 spring diaphragm

Trim:
• Low torque butterfly

Inherent Characteristic:
• Equal percentage

When the original Camflex was introduced in 1968 it created a revolutionary new category of control valves -the Rotary Globe.  This new type of valve converged the best control features of a conventional globe valve with a rotary action to produce a valve capable of replacing at least 80% of the control valves in use at that time.

Many improvements and enhancements have been made since that time, with over 1 million Camflex valves installed in a wide range of process control applications.  Everything from the most basic water applications up to severely erosive services that would tear other valves apart.  The Masoneilan Camflex valve is designed first and foremost to be an excellent control valve and has proven to truly be a Universal Rotary Globe control valve.

Sizes: 1” through 16”
(25 through 400 mm)

Ratings and Connections:
• Flanged: ANSI 150 – 600
• Flangeless: ANSI 150 – 600
UNI-DIN 10 – 100
• Screwed: NPT (1” through 2”)

Body Materials:
• Carbon steel
• Stainless steel
• High nickel alloy

Actuators:
• Model 35 spring diaphragm
• 70 Series cylinder

Trim:
• Eccentric rotary plug

Inherent Characteristic:
• Linear

Model BR200 and BR400 pneumatic booster relays offer high capacity air volume boost for faster, dynamic control valve system response. These devices feature a 1:1 input-to-output ratio with a maximum supply and signal pressure of 150 psi.

The BR200 and BR400 also include an integrated internal bypass valve for sensitivity adjustment and dynamic response optimization. These devices also have integrated filters in both the supply and signal ports and are configured using stainless steel components and corrosion resistant finishes for a robust and reliable assembly.

Input/Output Ratio:
• 1:1
Maximum Supply/Signal Pressure:
• 150 psi
Temperature range:
• -30°C to +83°C, option for -50°C to
+60°C or 0°C to +100°C
Maximum Cv BR200:
• Supply: 1.2
• Exhaust: 1.2
Maximum Cv BR400:
• Supply: 2.6
• Exhaust: 2.4

The 4411 I/P is manufactured with Reedex™ digital-micro valve technology for fast response. It is not sensitive to vibration.
• Low air consumption
• Adjustable tight shut-off feature

Output capacity:
• 12 scfm (20.4 Nm3/h)

Signals:
• Input: 4 – 20 mA (100 mA max)
• Output: 3 – 15 psig, 6 – 30 psig

Certification:
• Explosion proof and intrinsically safe enclosure rating per IP 66 and NEMA X

The Model 78-40 air filter regulators are compact, lightweight, high performance pressure reducing valves. They are used primarily for
supplying a stable source of air to process control equipment, such as control valve positioners and current to pneumatic transducers. These regulators are externally adjustable for fine tuning and include a locking feature for maintaining output pressure at the desired level. The compact design is easy to mount onto a range of equipment using various methods and orientations.

The Model 78-80 transfer valve is used to switch the air flow from one port to another, when the signal pressure becomes lower than the
set pressure in case of the air failure. The 3-way transfer valve can be also used as the lockup valve by plugging off the exhaust port. The lockup valve is used to lock the control valve in its last position (Air-Failure-Lock) by confining the air pressure in the actuator, when the signal pressure becomes lower than the set pressure in case of the air failure. When the failed air pressure is recovered above the set pressure, the locked position is released and the control valve will go back to the normal operation.

Air Filter Regulator Model 78-40:
• Inlet pressure rating: 210 psi
• Pressure set range : 5-100 psi
• Filter: Polyethylene (5μm)
• Temperature range: -40ºC to 83ºC, option for -50ºC to 60ºC or 0 to 100ºC

Transfer/Lock Up Valves Model 78-80:
• Transfer valve pressure: 250 psi
• Max signal pressure: 150 psi
• Temperature range: -30ºC to 83ºC

Version 78-80S:
• Cv In to Out: 0.8
• Cv Out to Ex: 1.3

Version 78-80H:
• Cv In to Out: 4.5
• Cv Out to Ex: 5.0

The 496 Series instrumentation can be configured as electro-mechanical switches, proximity switches, or position transmitters.

These devices offer high resistance to vibration and electrical interference for reliable valve-mounted performance.
Mechanical and electrical components can operate in harsh environments and are approved for use with various hazardous area ratings in most countries.

Configurations:
• Electromechanical Limit Switch:
quantity 1 or 2
single or double pole
double throw
• Inductive Proximity Detector Switch:
quantity 1 or 2
• Potentiometric Position Transmitter
• Opto-Electronics Position Transmitter

Certifications:
• Explosion-proof / Intrinsically safe
• North America, Canada, ATEX
• Regional – NEPSI / Taiwan TS, CCOE, CU-TR / AZ, UA, KOSHA, IA

The Masoneilan 41005 Series heavy duty control valve features balanced trim configurations. This product line offers efficient and stable operation under demanding process conditions, including applications with high-pressure drops and large temperature variations. Optional features include noise attenuation trim, anti-cavitation designs, and various balance seal options to meet a wide range of pressure and temperature requirements.

• Balanced trim design allows the use of smaller actuators to reduce overall assembly size and weight
• Heavy cage-guided construction offers dynamic support and trim alignment for resistance against flow-induced vibration throughout the entire valve stroke range. Heavy guiding of the plug enhances throttling control performance resulting in high process yields
• Low soft-goods parts count for improved valve reliability and reduced maintenance costs
• Reliable performance with standard solutions to control noise, cavitation, and valve leakage improving plant operating efficiency.

Sizes: 2” through 24” (50 through 600 mm)

Ratings and Connections:
• Flanged: ANSI 150 – 2500
UNI-DIN 10 – 400
• Welded: BW or SW
• Screwed: NPT 2” (50 mm)

Body Materials:
• Carbon steel
• Stainless steel
• Chrome-moly

Actuators:
• Model 87/88 multi-spring diaphragm
• Model 51/52/53 piston cylinder

Trims:
• Balanced cage-guided trim.
• Lo-dB, anti-cavitation and VRT (Variable Resistance Trim), single and
multiple cages are available

Inherent Characteristic:
• Linear or equal percentage

Versatile BHGE offers the Masoneilan 21000 Series heavy top-guided globe valve for a wide range of automated process control applications. The 21000 Series product line features a single-ported design configuration, which permits numerous trim, actuation, and instrumentation solutions including:

• Lo-dB* Noise Attenuation
•  Anti-Cavitation
• Reduced Capacity & Low Flow Trim
• Cryogenic Configuration
• Tight Shutoff
•  Environmental Packing
• Advanced Digital Positioning & Control

Reliable Rugged top-guiding of the plug promotes maximum valve stability under adverse conditions. The inherent ruggedness of the 21000 Series is field-proven, with thousands of units installed in process control plants around the world operating successfully with various fluids under mild and extreme conditions.

High Performance The combination of trim designs, actuator stability, shutoff capabilities, and superior valve positioning offers optimum control performance. The 21000 Series is also available in various materials, pressure ratings, and end connections offering a complete high-performance valve platform.

Sizes: 3/4” through 8”
(20 through 200 mm)

Ratings and Connections:
• Flanged: ANSI 150 – 2500
UNI-DIN 10 – 400
• Welded: BW or SW
• Screwed: NPT 3/4” through 2”
(20 through 50 mm)

Body Materials:
• Carbon steel
• Stainless steel
• Chrome-moly

Actuators:
• Model 87/88 multi-spring diaphragm
• Model 51/52/53 piston cylinder

Trims:
• Single seat plug top guided.
• Lo-dB and anti-cavitation trims, single or
double stage are available

Inherent Characteristic:
• Linear or equal percentage