Sales of valves for use in power plants
80000 Series 3-Way Diverting or Combining Valve
The 80000 Series is a heavy duty three-way control valve designed for either combining or diverting service. Standard features include:
Heavy Guiding Construction of the Masoneilan 80000 Series includes top guiding in the plug, as well as guiding within the seat ring locations providing an extremely well supported and stable design.
High Capacity Large flow galleries in the 80000 Series provide high capacity designs with low pressure recoveries. High critical flow factors are attained in both combining and diverting configurations.
Flow Stability The 80000 Series is a dual seated design with flow tending to open the valve at both ports. This provides inherent dynamic stable resulting in excellent throttling control performance.
Wide Operating Range Designs are available in various sizes and can be configured to operate within an extremely wide temperature range. This is accomplished through use of high performance materials and design configurations.
Reduced Emissions The 80000 Series can be supplied with the Masoneilan LE Packing design to provide low emissions performance meeting various environmental regulations worldwide.
NACE Compliance Construction for Sour Service Applications in accordance with NACE standard MR 0103 is readily available. Applications requiring compliance to MR 0175, 2003 Rev or ISO 15156 can also be provided.
- Large flow paths offer effective dirty service capabilities and high flow capacities. Heavy valve plug and stem guiding provides dynamic stability resulting in excellent process control and improved process yields.
- Top and bottom entry access to the valve internal components results in easy in-line access for maintenance and repair.
- Extremely rugged design for reliable operation in demanding plant environments and process control applications.
Sizes: 1” through 10” (25 through 250 mm)
Ratings and Connections:
• Flanged: ANSI 150 – 600
UNI-DIN 10 -100
• Threaded: NPT 3/4” through 2”
(20 through 50 mm)
• Welded: BW or SW
ANSI 900 – 2500 on request
Body Materials:
• Carbon steel
• Stainless steel
• Chrome-moly
Actuators:
• Model 87/88 multi-spring diaphragm
• Model 51/52/53 piston cylinder
Trim:
• V-port plug
Inherent Characteristic:
• Linear
41005 Series Globe & Angle Cage-Guided Valve
The Masoneilan 41005 Series heavy duty control valve features balanced trim configurations. This product line offers efficient and stable operation under demanding process conditions, including applications with high-pressure drops and large temperature variations. Optional features include noise attenuation trim, anti-cavitation designs, and various balance seal options to meet a wide range of pressure and temperature requirements.
- Balanced trim design allows the use of smaller actuators to reduce overall assembly size and weight
- Heavy cage-guided construction offers dynamic support and trim alignment for resistance against flow-induced vibration throughout the entire valve stroke range. Heavy guiding of the plug enhances throttling control performance resulting in high process yields
- Low soft-goods parts count for improved valve reliability and reduced maintenance costs
- Reliable performance with standard solutions to control noise, cavitation, and valve leakage improving plant operating efficiency.
Sizes: 2” through 24” (50 through 600 mm)
Ratings and Connections:
• Flanged: ANSI 150 – 2500
UNI-DIN 10 – 400
• Welded: BW or SW
• Screwed: NPT 2” (50 mm)
Body Materials:
• Carbon steel
• Stainless steel
• Chrome-moly
Actuators:
• Model 87/88 multi-spring diaphragm
• Model 51/52/53 piston cylinder
Trims:
• Balanced cage-guided trim.
• Lo-dB, anti-cavitation and VRT (Variable Resistance Trim), single and
multiple cages are available
Inherent Characteristic:
• Linear or equal percentage
21000 Series Globe & Angle Top-Guided Valve
Versatile BHGE offers the Masoneilan 21000 Series heavy top-guided globe valve for a wide range of automated process control applications. The 21000 Series product line features a single-ported design configuration, which permits numerous trim, actuation, and instrumentation solutions including:
- Lo-dB* Noise Attenuation
- Anti-Cavitation
- Reduced Capacity & Low Flow Trim
- Cryogenic Configuration
- Tight Shutoff
- Environmental Packing
- Advanced Digital Positioning & Control
Reliable Rugged top-guiding of the plug promotes maximum valve stability under adverse conditions. The inherent ruggedness of the 21000 Series is field-proven, with thousands of units installed in process control plants around the world operating successfully with various fluids under mild and extreme conditions.
High Performance The combination of trim designs, actuator stability, shutoff capabilities, and superior valve positioning offers optimum control performance. The 21000 Series is also available in various materials, pressure ratings, and end connections offering a complete high-performance valve platform.
Sizes: 3/4” through 8”
(20 through 200 mm)
Ratings and Connections:
• Flanged: ANSI 150 – 2500
UNI-DIN 10 – 400
• Welded: BW or SW
• Screwed: NPT 3/4” through 2”
(20 through 50 mm)
Body Materials:
• Carbon steel
• Stainless steel
• Chrome-moly
Actuators:
• Model 87/88 multi-spring diaphragm
• Model 51/52/53 piston cylinder
Trims:
• Single seat plug top guided.
• Lo-dB and anti-cavitation trims, single or
double stage are available
Inherent Characteristic:
• Linear or equal percentage
28000 Series VariPak* Micro-Trim Globe Valve
Designed specifically for low flow applications, the Masoneilan Varipak Control Valves provides excellent throttling control performance with a wide range of options and capabilities. Design optimization has also resulted in an extremely integrated and compact assembly.
Key features and benefits of the VariPak control valves include:
- Heavy Top-Guiding Rugged
- Application Flexibility
- Adjustable CV
- Compact Assembly
- Anti-Cavitation Trim
- Design flexibility
Sizes: 1” (25 mm) standard 1/2” through 3/4” (15 through 20 mm) available on request
Ratings and Connections:
• Flanged: ANSI 150 – 600
• Flangeless for mounting between flanges:
ANSI 150 – 2500
UNI-DIN 10 – 400
• Screwed: NPT 1/2” through 1”
(15 through 25 mm)
Body Materials:
• Stainless steel
• Monel
• Hastelloy C
• Alloy 20
Actuator:
• Integral spring diaphragm
Trims:
• Full stellite needle plug
• Multistep trim available
Inherent Characteristic:
• Linear
SVI II ESD Emergency Shutdown Device
The SVI II ESD is a SIL3 capable partial stroke test controller and emergency shutdown device.
Its safety and PST function are independent of each other, allowing the device to respond to a safety function while a test is active.
It can capture two shutdown events and allow continuous HART communications during a trip facilitating local panel annunciation using the built in discrete outputs.
The SVI II ESD automatically captures and stores the PST results in its non-volatile memory while Valvue ESD software regularly interfaces and updates its database with PST and full stroke data.
Communication / Control Platform:
• 24Vdc or 4-20mA Safety function trip signal (SIL3)
• HART® and Switch(Discrete Output) fault annunciation
Pneumatics:
• 20 – 120 psi Supply pressure
• Single-acting
Operating Temperature:
• -40ºC to +85ºC
Materials:
• Aluminum (painted) or Stainless Steel Housing
• Composite Polymers and Stainless Steel Pneumatics I/O:
• 4-20mA output and discrete Input
Mounting / Feedback:
• Non-Contact magnetic position feedback
• Rotary or Linear
• Stainless Steel brackets for all Masoneilan and major valve brands
Certifications:
• Explosion / Flame / Dust-proof and Intrinsically safe
• FM, CSA, ATEX, IECEx
• Regional – NEPSI, Taiwan TS, CCOE, CU-TR, AZS, UZ, INMETRO, JIS, KOSHA, IA
Diagnostics:
• Partial Stroke Testing (PST)
Configuration / Monitoring Interfaces:
• Local Display with Pushbuttons
• ValVue* ESD Device Diagnostic and Configuration Tool
• DTM or eDDL – seamless integration into leading asset management systems
SVI II AP Advanced Performance Digital Valve Positioner (HART)
Supporting HART communications over the 4-20mA signal, the SVI II AP digital valve positioner is suitable for control systems with 4-20mA signaling.
Certifications:
ATEX, FM, IEC, GOST, NEPSI, KOSHA, INMETRO, JIS and CSA approvals. Explosion proof, intrinsically safe and dust protection.
Communication Platform:
HART revision 5 or revision 7 (field selectable)
Signal – Supply:
4-20 mA control signal No external power required Supply pressure: 20 – 150 psi (1.4 – 10.3 bar)
SVi1000 Digital Valve Positioner
The SVi1000 is a user-friendly 4-20mA with HART® digital valve positioner for single-acting pneumatic control valves.
Leveraging many of the same technologies from the SVI II AP, the SVi1000 is perfect for those that need a low maintenance valve positioner, and an ideal candidate for upgrading legacy electro-pneumatic positioners.
Designed to be installed and operational in less than 5 minutes, the SVi1000 is easily through its “One button, one function” local pushbuttons or via its powerful DTM interface and ValVue* software.
Communication / Control Platform:
• 4-20mA with HART®
Pneumatics:
• 20 – 100 psi Supply pressure
• Single-acting
Operating Temperature:
• -40ºC to +85ºC
Materials:
• Aluminum (painted)
• Composite Polymers and Stainless Steel Pneumatics I/O:
• 4-20mA output or (2) Configurable Switches
Mounting / Feedback:
• Non-Contact magnetic position feedback
• Rotary or Linear
• Stainless Steel brackets for all Masoneilan and major valve brands
• Integrated magnet option for custom mounting
Certifications:
• Intrinsically safe / Non-Incendive / Limited Energy
• FM, FMc, ATEX, IECEx
• Regional – NEPSI, Taiwan TS, CCOE, CU-TR, AZS, UZ, INMETRO, IA
Diagnostics:
• Standard Continuous and Offline Diagnostics/Methods
Configuration / Monitoring Interfaces :
• User-friendly “One button, one function” local interface
• ValVue* Device Diagnostic and Configuration Tool
• DTM or eDDL – seamless integration into leading asset management systems
49000 Series Globe and Angle Style with Lo-dB* or V-LOG* Trim
The 49000 Series V-LOG high pressure drop valve features an enlarged body gallery to accommodate gas expansion and up to 36 stages of pressure reduction via a stacked disk trim design. It offers optimized severe service solutions for high-pressure drop applications with potential damaging noise or cavitating fluid conditions. Built around the Masoneilan V-LOG Energy Management Trim, the 49000 Series is capable of handling a wide range of both liquid and gas services in a variety of process industries.
Benefits of the 49000 Series V-LOG high pressure drop valve include:
- Compared to forged or fabricated bodies, the cast globe-style body of the 49000 Series offers lower in weight and overall dimensions which helps reduce installation costs.
- Enlarged body galleries and expanded outlets provide velocity control for expanding gases.
- Galleries sized to accept “typical” V-LOG trim dimensions for a standardized body platform and an optimized solution.
- V-LOG trim for use with either compressible or incompressible fluids under severe service conditions.
- V-LOG and Lo-dB trim provide reduced noise and cavitation that could negatively affect the valve and/or surrounding equipment.
The V-LOG Trim can be configured for use with either compressible or incompressible fluids under severe service conditions making the 49000 Series valve a superior choice for liquid and gas applications including:
- Boiler feed water start-up and control
- Steam letdown
- Pump discharge
- Water reinjection
- Gas recycle
Sizes:
4” through 36”
(100 through 900 mm)
Ratings and Connections:
• Flanged: ANSI 150-2500
UNI-DIN 10 – 400
• Welded: BW
Body Materials:
• Carbon steel
• Stainless steel
• Chrome-moly
Actuators:
• Model 87/88 multi-spring diaphragm
• Model 51/52/53 piston cylinder
Trims:
• Single or double stage Lo-dB and V-LOG energy management trim available in low noise flow-to-open designs or anticavitation
flow-to-close variety of balanced trim options for Class IV and V shutoff
Inherent Characteristic:
• Linear or equal percentage